Epson T-750 User Manual - Page 140
International Character Sets - action printer
View all Epson T-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Table D-I. DIP switch group 1 Switch number Function Action when ON Action when OFF l-l Select condensed or normal Condensed Normal characters 1-2 Select slashed or unslashed zero 0 0 1-3 Select character table* Graphics Italics 1-4 Select printer commands IBM printer emulation mode ESC/P 1-5 Select print quality NLQ Draft l-6 Select international character set l-7 1-8 See Table D-3 In IBM printer emulation mode, a CR is added to an 1 or ESC J if this switch is OFF Table D-2. DIP switch group 2 Switch number Function 2-1 1 Select page length 2-2 Select automatic sheet feeder mode 2-3 1 Skip-over-perforation 2-4 1 Add line feed after carriage return Action when ON 12 inch Selected 1 inch CR + LF Action when OFF 11 inch Not selected None CR only Note: The factory setting for all switches except l-6, l-7, and l-8 is OFF International Character Sets Thirteen international character sets are available in Epson mode. Eight of these are selected by DIP switches l-6 to l-8 and the remaining five (Japan, Norway, Denmark II, Spain II and Latin America) can be selected with the ESC R command, which is described in the Command Summary. For the characters available in each character set, see Appendix B. In IBM printer emulation mode, you can select only two character sets; the standard character set (Table 1) and the international character set (Table 2). You can see the differences by looking at the IBM character tables in Appendix B. There is also a command to let you print any of the characters in the international character set and several additional characters. Together these form the symbol set. The Defaults and DIP Switches D-3