Epson WorkForce Enterprise WF-C17590 Users Guide - Page 283

4. Do one of the following to select fax recipients: • Select Direct Enter, enter a fax number, and select OK. To add another fax number, repeat these steps. Note: If direct dialing has been restricted, you can only select the number from the contact list or fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax number. If the access code has been set up in the Line Type setting, enter the # pound sign instead of the code. If your fax number requires a brief pause, select the icon to insert a pause symbol (-). • Select the Recipient tab to display the contact list. Select the checkbox next to one or more contacts (select the checkbox again to deselect it). • Select the icon to search for recipients by name, index name, or entry number. Select Close when you finish. Note: To delete selected recipients, select the Enter Recipient field, select the recipient you want to delete, and select Remove. 5. If you need to change any fax settings, select the Fax Settings tab and select your settings. 6. If you want to preview your fax in black-and-white on the LCD screen, select Preview. (If the preview looks incorrect, select Retry, reposition the document or change the fax settings, and repeat this step.) Note: If you do not touch the preview screen for 20 seconds, your product sends the fax automatically. You cannot preview images when the Direct Send setting is turned on. 7. If you want to save your fax settings for later use, select Presets and add a new entry. 8. Select Send. Note: To cancel faxing, check the job status by selecting Job/Status. Your product scans your original and prompts you to place additional pages, if necessary. After scanning your originals, your product dials the number and sends the fax. 283