Epson WorkForce Enterprise WF-C17590 Administrators Guide - Page 18

Parent topic: Configuring IPsec/IP Filtering IPsec/IP Filtering Policy Settings Default Policy Settings Setting Access Control IKE Version Authentication Method Pre-Shared Key Confirm Pre-Shared Key ID Type ID Encapsulation Remote Gateway(Tunnel Mode) Options/Description Permit Access to permit IP packets to pass through Refuse Access to prevent IP packets from passing through IPsec to permit IPsec packets to pass through Select the version of the Internet Key Exchange (IKE) protocol that matches your network environment Select an authentication method, or select Certificate if you have imported a CA-signed certificate If necessary, enter a pre-shared key between 1 and 127 characters long Confirm the pre-shared key you entered If you selected Pre-Shared Key as the Authentication Method, select the ID type from the list. If you selected IKEv2 as the IKE Version setting, enter the necessary ID information If you selected IPsec as the Access Control option, select one of these encapsulation modes: Transport Mode: if you are using the product on the same LAN; IP packets of layer 4 or later are encrypted Tunnel Mode: if you are using the product on an Internetcapable network, such as IPsec-VPN; the header and data of IP packets are encrypted If you selected Tunnel Mode as the Encapsulation option, enter a gateway address between 1 and 39 characters long 18