Epson WorkForce Pro WF-C4810 Users Guide - Page 207

• If you do not have a distinctive ring service, select Skip and go to step 9. Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in the DRD Setting. If you select a ring pattern other than All, Receive Mode is automatically set to Auto. 7. On the Proceed screen, confirm the displayed settings and select Proceed, or press the back arrow to change the settings. 8. On the Run Check Fax Connection screen, select Start Checking and follow the on-screen instructions to check the fax connection and print a report of the check result. If there are any errors reported, try the solutions on the report and run the check again. If the Select Line Type screen appears, select the correct line type. If the Dial Tone Detection screen appears, select Do Not Detect. However, disabling the dial tone detection function may drop the first digit of a fax number and send the fax to the wrong number. Parent topic: Setting Up Basic Fax Features Related tasks Entering Characters on the LCD Screen Selecting the Line Type If you connect the product to a PBX phone system or terminal adapter, you must change the product's line type. PBX (Private Branch Exchange) is used in office environments where an external access code such as "9" must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched Telephone Network), which is a standard home phone line. Note: This setting can be locked by an administrator. If you can't access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Settings > General Settings > Fax Settings > Basic Settings > Line Type > PBX. 207