Epson WorkForce Pro WF-C4810 Users Guide - Page 212

Setting Distinctive Ring Rings to Answer Remote Receive Rejection Fax Options All Single Double Triple Double&Triple 1 to 9 Off On Start Code Various Description If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. Sets the number of rings before your product receives a fax. If Receive Mode is set to Auto and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call. Lets you start receiving faxes using your phone instead of operating the product (if the Receive Mode is set to Auto). When you select On, you must also set a Start Code. If you are using a cordless handset with its base connected to the product, you can start receiving the fax by entering the code using the handset. Lets you automatically reject faxes from blocked numbers, with blank headers, or from unrecognized contacts. Parent topic: Selecting Advanced Fax Settings Send Settings - Fax Set the send options you want to use for outgoing faxes. Setting Wait Time for Next Original Fax Preview Display Time Options Off On Off On Description Sets a time in between sending the next fax Sets a time for previewing the scanned document on the LCD screen before it is sent 212