Epson WorkForce Pro WF-C4810 Users Guide - Page 331

• When placing originals on the scanner glass, align the corner of the original with the corner indicated by the arrow. If the edges of the copy are cropped, move the original slightly away from the corner. • Clean the scanner glass and the document cover. If there is dust or stains on the glass, the copy area may extend to include the dust or stains. • Load paper in the correct direction and slide the edge guides against the edges of the paper. • Select the appropriate original size in the copy settings. You can use the preview option in your printer software to check your margins before you print. Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - Mac Border Appears on Borderless Prints If you see a border on borderless prints, try these solutions: • Make sure you are printing on a compatible borderless paper type and size. Note: For custom paper sizes, make sure you select a supported borderless page width. • Windows: Make sure you selected the Borderless setting in your printer software. • Mac: Make sure you selected the Borderless checkbox or a paper size with a Borderless option in your printer software. • Adjust the Expansion setting to adjust the amount of image expansion on the edges of borderless prints. • Make sure the image size and the paper size are set correctly; if the image is small, the enlargement may not be enough to cover the paper. • Access the Extended Settings (Windows) or Printing Preferences (Mac) and select Remove White Borders. Parent topic: Solving Page Layout and Content Problems Incorrect Characters Print If incorrect characters appear in your prints, try these solutions before reprinting: • Make sure any cables are securely connected at both ends. 331