Epson WorkForce WF-3540 Quick Guide - Page 24
Cleaning the Print Head - ink cartridges
View all Epson WorkForce WF-3540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Cleaning the Print Head If print quality has declined and the nozzle check indicates clogged nozzles, you can clean the print head. Print head cleaning uses ink, so clean it only if necessary. Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it when a cartridge is low. You must replace the cartridge first (see page 26). 1. Press if necessary, press l or r, then select Setup. 2. Select Maintenance, then Head Cleaning. 3. When you see the first screen, press Proceed, then choose the ink set you want to clean. Tip: Use the nozzle check pattern to determine which colors need cleaning. You can save ink by cleaning only selected colors. Cleaning takes a few minutes. When it's finished, you see a message on the LCD screen. Caution: Never turn off the product during head cleaning or you may damage it. 4. Select Print Nozzle Check Pattern. Then press one of the x buttons to print the nozzle check and confirm that the print head is clean. Note: If you don't see any improvement after cleaning the print head four times, leave the product on and wait at least six hours to let any dried ink soften. Then try cleaning the print head again. If quality does not improve, one of the ink cartridges may need to be replaced. If that doesn't help, contact Epson as described on page 35. If you do not use your product often, it is a good idea to print a few pages at least once a month to maintain good print quality. 24 Cleaning the Print Head