Fisher and Paykel DD24DCTX9 N Installation Guide - Page 13

Secure To The Cabinetry On The Sides, Optionally Secure To The Cabinetry Above, Refit The Drawer

Get Fisher and Paykel DD24DCTX9 N PDF manuals and user guides View all Fisher and Paykel DD24DCTX9 N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

!0-B SECURE TO THE CABINETRY ON THE SIDES For further adjustment, using the most appropriate length Hexagonal socket supplied, fully extend levelling feet up to required distance by hand. !1-B OPTIONALLY SECURE TO THE CABINETRY ABOVE (x2) The top mounting brackets will only bend upwards a maximum of 10 mm. Secure using two pairs of formed brackets. Repeat on the other side of the chassis. x4 Hexagonal socket Ensure product is level and aligning with cabinetry. !2-B REFIT THE DRAWER ONTO THE RUNNERS 2 Lift or rotate counterclockwise the 4 drawer back onto the drawer runners on either side. 4" (100mm) Before refitting the 3 drawer, ensure the hoses are not twisted and the latches at the rear of each drawer runner are 1 facing forward. Pull the release tabs forward on both sides 4" (100mm). Ensure the tabs are fully pulled forward and click into place. Release tab 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
1
2
3
4
x4
(x2)
!0
-
B
SECURE TO THE CABINETRY ON THE SIDES
!1
-
B
OPTIONALLY SECURE TO THE CABINETRY ABOVE
Secure using two pairs
of formed brackets.
Repeat on the other
side of the chassis.
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
levelling feet up to
required distance by hand.
Ensure product is level and
aligning with cabinetry.
Hexagonal
socket
The top mounting
brackets will only
bend upwards a
maximum of 10 mm.
!2
-
B
REFIT THE DRAWER ONTO THE RUNNERS
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
each drawer runner are
facing forward.
Lift or rotate counterclockwise the
drawer back onto the drawer runners
on either side.
Pull the release tabs forward on both
sides 4” (100mm). Ensure the tabs are
fully pulled forward and click into place.
Release tab
4” (100mm)