Fisher and Paykel DD24DCTX9 N Installation Guide - Page 32
Refit The Drawer Onto The Runners, Secure To The Cabinetry On The Sides
 |
View all Fisher and Paykel DD24DCTX9 N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
!1-B SECURE TO THE CABINETRY ON THE SIDES The product has three pairs of fixing points: Ensure the sound insulation is repositioned correctly. two pairs of formed brackets on either side of the chassis (use 5/8" (16mm) screws) 2 Before refitting the drawer, ensure the hoses are not twisted and the latches at the rear of each drawer runner are 1 facing forward. 2 a pair of fixing holes either side on the bottom (use 1 1/2" (38mm) 1 fixing screws & washers) !2-B REFIT THE DRAWER ONTO THE RUNNERS Lift or rotate counterclockwise the drawer back onto the drawer runners on either side. 4 4" (100mm) 3 Pull the release tabs forward on both sides 4" (100mm). Ensure the tabs are fully pulled forward and click into place. Release tab 12
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37 -
38
-
39
-
40
 |
 |
12
1
2
1
2
3
4
4” (100mm)
!2
-
B
REFIT THE DRAWER ONTO THE RUNNERS
!1
-
B
SECURE TO THE CABINETRY ON THE SIDES
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
each drawer runner are
facing forward.
Lift or rotate counterclockwise the drawer
back onto the drawer runners on either side.
Pull the release tabs forward on both
sides 4” (100mm). Ensure the tabs are
fully pulled forward and click into place.
Release tab
The product has three
pairs of fixing points:
Ensure the sound insulation
is repositioned correctly.
a pair of fixing
holes either side
on the bottom
(use 1 1/2” (38mm)
fixing screws &
washers)
two pairs of formed
brackets on either side
of the chassis
(use 5/8” (16mm) screws)