Fisher and Paykel DD24DCTX9 N Installation Guide - Page 28
Maximum Distance Of Hoses & Cord From Chassis Edge, Attach Cavity Bracket Dd24sdft Models Only
View all Fisher and Paykel DD24DCTX9 N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
7 MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE LEFT HAND SIDE Drain hose - 78 1/2" (2000 mm) Inlet hose - 64 3/4" (1650 mm) Power cord (excl.plug) - 78 1/2" (2000 mm) RIGHT HAND SIDE Drain hose - 70 1/2" (1800 mm) Inlet hose - 49" (1250 mm) Power cord (excl.plug) - 78 1/2" (2000 mm) 8 ATTACH CAVITY BRACKET (DD24SDFT MODELS ONLY) IMPORTANT! The enclosed cavity bracket is fitted before installation in order to conceal the gap at the top of the cavity left after installation. 1 Firmly push the bracket so that the prongs engage with the top 2 tabs and it clicks into place. IMPORTANT! Ensure the prongs have not been driven down into the chassis as this will damage the lid below. Ensure the top trim seal is facing forward after attaching the bracket. Ensure the cavity panel bracket is positioned so that the "F" arrow is pointing towards the front of the chassis. 8