Fisher and Paykel DD24DCTX9 N Installation Guide - Page 27

COUNTERTOP 3/8" (10 mm) Moisture protection tape must be applied 6 CAVITY PREPARATION These marks indicate formed bracket screw locations, if securing by drawer removal. If there is no side partition, you can construct timber bracing as something to secure into. WARNING! Incorrect placement of the hole will result in damage to hoses. Ø max. 1 1/2" (38 mm) max. 17 11/16" (450 mm) Max 1/4" (5mm) Max distance between hole edge and rear inner face Max 1/2" (10mm) Max distance between hole edge and shelf 7 Service Holes Can be located either side of dishwasher, close to the rear face and the shelf, as illustrated. O If the hole is through wood, make sure its edges are smooth and rounded. O If the hole is through metal, ensure you fit the supplied Edge Protector to prevent damage to the power cord. min. 7 7/8" (200 mm) Water Connection Recommended HOT (Maximum 140°F/60°C). Supplied hose to suit 3/8" (9 mm) male compression fitting. Water Pressure Water softener models Max. 1 MPa (145 psi) Min. 0.1 MPa (14.5 psi) Models without water softener Max. 1 MPa (145 psi) Min. 0.03 MPa (4.3 psi) IMPORTANT! The power outlet must be located in a cabinet adjacent to the dishwasher cavity. 110-120 VAC max. 15 A