Fisher and Paykel RS36A72J1 Installation Manual - Page 25
Top Trim And Hinge End Caps, Install Water Filter Cartridge
View all Fisher and Paykel RS36A72J1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
180 150 150 !7 TCOP TRIM AND HINGE ENPD CAPS 1 Secure the top trim to the ceiling of the eLnclosure O with screw x1 (#8 x 16 mush washer screw). Repeat this process on the opposite side. 2 Replace the left hinge end cap. Align hinge cap to the product, press and firmly slide the cap to the right (refer to A). A Hold onto the corner of the end cap, firmly push up and to the left to engage securing hook. Ensure cap is flush with the product. B 3 Replace right hinge end cap. Align hinge cap to product, press and firmly slide the cap to the left (refer to B). Ensure cap is flush with the product. !8 INSTALL WATER FILTER CARTRIDGE IMPORTANT! The water filter head must be firmly pushed into the product and secured, incorrect installation can lead to water leaks. C P 1 Remove the red protective cap on the spigot head and align the filter cartridge tool over the filter handle. 2 Pull the freezer drawer out slightly and insert the filter cartridge and tool into A the bottom left of the product. Firmly push the cartridge in until the filter head cannot be pushed any further (refer to A). 3 Turn 90° clockwise to tighten. Remove filter cartridge tool and close freezer drawer. Filter cartridge in the locked position 23