Foxconn Renaissance English Manual. - Page 34

3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. SuperIO Configuration Configure F71883FG Super IO Chipset Help Item IrDA Address IrDA Mode IR Duplex Mode IRTX Pin Select IRRX Pin Select IR Tx to Rx Delay Select IR Rx to Tx Delay Select [2F8/IRQ3] Options [IrDA (1.6us)] [Half Duplex] [Normal] [Normal] [No Delay] [No Delay] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► IrDA Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard infrared device. ► IrDA Mode This item is used to select the IR mode. The available settings are: [IrDA (1.6us)]: An IrDA device for maximum 115200 bit/s. [IrDA (3/16 bit)]: A faster IrDA for 1152000 bit/s. ► IR Duplex Mode This item enables you to determine the transfer mode of the onboard infrared chip. Setting values are: [Full Duplex], [Half Duplex]. ► IRTX Pin Select This item allows BIOS to Select Transmit pin is in normal condition or inverse the IRTX (IR Mode). ► IRRX Pin Select This item allows BIOS to Select Receiver pin is in normal condition or inverse the IRRX (IR Mode). ► IR Tx to Rx Delay Select This item allows BIOS to Select IR from Tx to Rx 4 charactersTime Delay. (IR Mode) ► IR Rx to Tx Delay Select This item allows BIOS to Select IR from Rx to Tx 4 charactersTime Delay. (IR Mode) 27