Foxconn Renaissance English Manual. - Page 41
► CPU Fan/System Fan1/System Fan2/System Fan3 Speed - 2 manual
View all Foxconn Renaissance manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3 PC Health Status CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. PC Health Status PC Health Status Help Item H/W Health Function [Enabled] Enables Hardware CPU Temperature :84oC/183oC Health Monitoring System Temperature :42oC/107oC Device. CPU Fan Speed :2127 RPM System Fan1 Speed :N/A System Fan2 Speed :N/A System Fan3 Speed :N/A VCore VDIMM VNB +5V +12V VTT VCC VSB :1.192 V (+0.00V) :1.481 V :1.088 V :5.183 V :11.792 V :1.691 V (+0.00V) :3.360 V :3.360 V Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults PC Health Status ► H/W Health Function This item is used to enable hardware health monitoring device. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan1/System Fan2/System Fan3 Speed The CPU fan/System fan1/System fan2/ System fan3 speed are automatically detected and displayed by the system. ► VCore/VDIMM//VNB/+ 5V/+12V/VTT/VCC/VSB The current voltages are automatically detected and displayed by the system. ► CPU FAN Mode Setting This item is used to select CPU fan configuration mode. You can select "Manual Mode by RPM/DutyCycle" to set the CPU fan speed manually. Default value is "Auto Fan by RPM". ► Temperature Limit of Highest/Second/Third/Lowest This option is used to set CPU temperature grade from 0oC to 127oC. When CPU temperature reaches a higher grade, CPU fan will go faster. When reaches a lower grade, CPU fan will go slower. You can modify the grade value by pressing / key, or input it directly. ► Fan Highest/Second/Third/Fourth/Lowest Setting This option is used to set the CPU fan speed according to different CPU temperature grade. You can modify the setting by pressing / key, or input a value directly. The illustration in next page can help you to know about the relationship between temperature and fan speed. ► System FAN Mode Setting This item is used to select system fan configuration mode. ► Temperature Limit of Highest/Second/Third/Lowest This option is used to set system temperature grade from 0oC to 127oC. When system temperature reaches a higher grade, system fan will go faster. When reaches a lower grade, system fan will go slower. You can modify the grade value by pressing / key, or input it directly. 34