Foxconn Renaissance English Manual. - Page 47
All Voltage Control
View all Foxconn Renaissance manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3 Mhz], [1600 Mhz], [1866 Mhz] and [2133 Mhz]. ► DRAM tCL This item controls the CAS latency, which determines the timing delay (in clock cycles) before SDRAM starts a read command after receiving it. ► DRAM tRCD This item allows you to select a delay time (in clock cycles) between the CAS and RAS strobe signals. ► DRAM tRP This item allows you to select the DRAM RAS precharge time (in clock cycles). ► DRAM tRAS This item allows you to set the precharge delay time (in clock cycles). ► DRAM tRRD This item allows you to set RAS to RAS Delay (in clock cycles). ► DRAM tWR This item allows you to set Write to Precharge delay (in clock cycles). ► DRAM tWTR This item allows you to set minimum Write-to-read delay (in clock cycles). ► DRAM tRTP This item allows you to set the read CAS to precharge time (in clock cycles). ► DRAM tRFC This item allows you to set Row Refresh Cycle (in clock cycles). All Voltage Control CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. ALL Voltage Control All Voltage Control Help Item CPU VCore Voltage Control [+0V] The Maximum Voltage of CPU VTT Voltage Control [+0V] available adjustment Memory Voltage Control [1.500V] is "+0.63V" NB Voltage Control [1.10V] Warning!! Adjusting the Voltage VCore :1.216 V (+0.00V) beyond the CPU VCore Target VCore Voltage :1.200 V (+0.00V) default Voltage could VTT :1.674 V (+0.00V) result in damage to Target VTT Voltage :1.674 V (+0.00V) CPU. the CPU VCore default Voltage is "1.1V". Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► CPU VCore Voltage Control This item is used to adjust CPU Vcore voltage. The maximum voltage of available adjustment is "+0.63V". Adjusting the voltage beyond the CPU VCore default voltage could result in damage to CPU. The CPU Vcore default volatge is "1.1V". ► CPU VTT Voltage Control This item is used to adjust CPU VTT voltage. The maximum voltage of available adjustment is "+0.5V". Adjusting the voltage beyond the CPU VTT default voltage could result in damage to CPU. The CPU VTT default volatge is "1.1V". 40