Foxconn Renaissance English Manual. - Page 46

► Intel(R) C-STATE Tech This item is used to enable or disable C-State. C-State means CPU idle is set to C2/C3/C4. ► C State Package limit Setting The selected option will be entered into C State package limit register. ► C1 Auto Demotion When enable, CPU will conditionally demote C3/C6/C7 request to C1 based on uncore autodemote information. ► C3 Auto Demotion When enable, CPU will conditionally demote C6/C7 request to C3 based on uncore autodemote information. Memory Timing Config. CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. Memory Timing Config. Memory Timing Config. Help Item Performance Tuning Mode [Auto] The selection Uncore Frequency [3733 Mhz] of performance Tuning Mode which impacts memory sizing behavior. 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Performance Tunig Mode The selection of this item will impact the memory sizing behavior. [Auto]: BIOS will automatically determine the memory frequency. [Manual]: You can set the memory frequency manually . [XMP]: "XPM" means Intel Extreme Memory Profile. Intel Extreme Memory Profile specification is part of a complete eco-system architecture designed for the enthusiast PC user. The new XMP specification allows both the novice and the advanced user to easily configure their Intel future systems for over-clocking performance.Select [XPM], when the memory module pluged in system supports XPM mode, system will enter XPM status. ► Uncore Frequency This item is used to select the uncore frequency. Select [Auto], BIOS will select the frequency automatically. You may manually select a frequency from the following options:[1333 Mhz], [1600 Mhz], [1866 Mhz], [2133 Mhz], [2400 Mhz], [2666 Mhz], [2933 Mhz], [3200 Mhz], [3466 Mhz], [3733 Mhz] and [4000 Mhz]. When you set "Performance Tuning Mode" to [Manual], the following items will appear: ► DRAM Frequency This item is used to select memory frequency. Options are: [800 Mhz], [1066 Mhz], [1333 39