Foxconn Renaissance English Manual. - Page 35
► 1394 Controller, ► Broadcom5786 Lan Controller, ► Broadcom5786 Lan BOOTROM, ► SAS Controller, ►
View all Foxconn Renaissance manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3 OnBoard Device Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. OnBoard Device Configuration OnBoard Device Configuration Help Item 1394 Controller [Enabled] Options Broadcom5786 Lan Controller [Enabled] Broadcom5786 Lan BOOTROM [Disabled] Enabled SAS Controller [Enabled] Disabled JMicron 36x ATA Controller [IDE Mode] HDA Controller [Enabled] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► 1394 Controller This item is used to enable or disable the 1394 controller. ► Broadcom5786 Lan Controller This item is used to enable or disable the onboard Broadcom5786 LAN controller. ► Broadcom5786 Lan BOOTROM This item is used to enable or disable the onboard Broadcom5786 LAN boot optional ROM. A LAN boot ROM lets you set up a diskless workstation on the network. By installing a boot ROM in the network board, you can enable a client PC system on the network to be booted remotely. ► SAS Controller This item is used to enable or disable the SAS(Serial Attached SCSI) controller. ► JMicron 36x ATA Controller This item is used to select the operating mode for JMicron 36x ATA controller. Setting values are: [Disabled], [IDE Mode], [RAID + IDE Mode] and [AHCI + IDE Mode]. This item is in charge of the ESATA ports on the back panel and the IDE connector on board. ► HDA Controller This item is used to enable or disable the HD Audio Controller. 28