Fujitsu S510M Getting Started Guide - Page 13
Scanning irregular-shaped Documents
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4. Press the [SCAN] button. Ö The front and back images are merged into a double-page spread image. The loading method and ScanSnap Manager's HINT settings differ according to the documents to be scanned. Refer to "ScanSnap S510M for Mac Operator's Guide" on the "ScanSnap Setup CD-ROM" for details. 3.4.2. Scanning irregular-shaped Documents This section explains how to scan documents that are difficult to scan as it is. 1. Click and hold the ScanSnap Manager icon on the Dock menu, and select [Settings...] from the menu. 5. Load the Carrier Sheet onto the ScanSnap. • Load the Carrier Sheet with the portion striped in black and white as the leading edge as shown in the right figure. • When the Carrier Sheet is used for scanning, continuous scanning is not possible. Scan one piece or one sheet at one time. 6. Press the [SCAN] button. ÖScanning starts. ÖThe image is centered and output in the specified size. The loading method and ScanSnap Manager's HINT settings differ according to the documents to be scanned. Refer to "ScanSnap S510M for Mac Operator's Guide" on the "ScanSnap Setup CD-ROM" for details. Ö The "Scan and Save settings" appears. 2. On the [Paper size] tab, click the "Carrier Sheet Settings..." button. Ö The "Carrier Sheet Settings" dialog box appears. 3. On the "Carrier Sheet Settings" window, select "Create front and back images separately" in the "Mode" drop-down list, and then click the [OK] button. 4. Open the Carrier Sheet and place the document inside. Neatly align the top of the material with the top of the Carrier Sheet. Center the material so that it is entirely contained in the Carrier Sheet. ScanSnap S510M for Mac Getting Started | 11