Fujitsu S510M Getting Started Guide - Page 21

ATTENTION Make sure that the Pad ASSY is firmly secured. If it is not secured, documents will jam or other feeding errors may occur. 5. Close the ADF ADF 6.3. Replacing the Pick Roller Replace the Pick roller following the procedures below. 1. Remove the document on the Paper chute if any. 2. Pull the Cover open lever and open the ADF. Paper chute ADF Cover open lever Ö Gently push the ADF until you hear it click when returning it to its original position. 6. Turn on the scanner. Ö The ScanSnap Manager icon changes from the inactive state to the active state . 7. Click and hold down the mouse button on the ScanSnap Manager icon in the Dock menu, and select [Check consumable supplies] from the menu. 8. In the "Check consumable status" window, click the [Reset] button of the consumable you replaced. 3. Adjust the Side Guide to the "A5" size. A5 A5 4. Pinch the handle on the Sheet guide to remove it. Sheet guide Handle Claw Ö A confirmation pop-up screen appears. 5. Rotate the Pick roller bushing (Left) in the direction of the arrow. Ö If you click the [Yes] button, the counter is reset to "0." Pick roller Pick roller bushing Pick roller shaft ScanSnap S510M for Mac Getting Started | 19