Fujitsu S510M Getting Started Guide - Page 20

6. Consumables/Carrier Sheet This chapter describes how to replace consumables. WARNING Fire/Electric Shock Before you replace the consumables of this scanner, unplug the AC adapter cord from the outlet to turn off the scanner. 6.1. Part Numbers and a Replacement Cycle of Consumable The table below shows the part numbers of the consumables and rough guidelines on the replacement of consumables. No. Description 1 Pad ASSY 2 Pick roller P/N PA03360-0002 PA03360-0001 Replacement Cycle 50,000 scan or one year 100,000 scans or one year Replacement cycles above are rough guidelines when considering the use of A4/Letter wood-free paper 80 g/m2 (21 lb). The actual cycle may vary depending on the types of paper to be scanned. Use only the consumables specified by PFU LIMITED. To estimate the time when you have to replace the HINT consumables with new ones and to monitor the total number of scanned pages, refer to the following: 1. Click and hold down the mouse button on the ScanSnap Manager icon in the Dock menu. 2. Select [Check consumable supplies] from the menu. Replace the consumables according to "Target to change supplies" as a rough guideline. For details about consumables and where you can purchase them, visit the following website or contact the store where you purchased your scanner. Website: http://scansnap.fujitsu.com/ 6.2. Replacing the Pad ASSY Replace the Pad ASSY following the procedures below. 1. Remove the documents on the Paper chute if any. 2. Pull the Cover open lever and open the ADF. Paper chute ADF Cover open lever 3. Remove the Pad ASSY. While holding the both sides of the Pad ASSY, pull out the Pad ASSY in the direction of the arrow. Pad ASSY ADF 4. Install the new Pad ASSY. Pad ASSY ADF Ö You will see the "Check consumable status" window, which shows how many times consumables have been used. 18 |