Garmin GPSMAP 741xs Owner's Manual - Page 35
Using BlueChart g2 Vision, detaileD RoaDs anD POI Data - gpsmap 541s manual
View all Garmin GPSMAP 741xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using BlueChart g2 Vision NOTICE BlueChart g2 Vision data cards are not waterproof. When you are not using the card, keep it in the original packaging for safekeeping and store it away from exposure to sun and rain to prevent damage to the card. BlueChart g2 Vision data cards are susceptible to damage from static electricity. In low-humidity environments, you should ground yourself on a large metal object before handling the card to prevent damage to the card. Optional BlueChart g2 Vision preprogrammed SD cards allow you to get the most out of your unit. In addition to detailed marine charting, BlueChart g2 Vision has the following features: • Mariner's Eye 3D-provides a view from above and behind the boat for a three-dimensional navigation aid. The BlueChart g2 Vision Mariner's Eye 3D is more detailed than the preloaded data (page 15). • Fish Eye 3D-provides an underwater 3D view that visually represents the sea floor according to the information on the chart. • High Resolution Satellite Imagery-provides high-resolution satellite images for a realistic view of the land and water on the Navigation chart. • Aerial Photos-provides a view of marinas and other navigationally significant aerial photos to help you visualize your surroundings. • Detailed Roads and POI data-provides a view of roads, restaurants, and other points of interest (POIs) along the shore. • Current Data-provides a view of current-station information (page 36). • Auto Guidance-uses the chart data and specified boat-safe depth to Where To? determine the best course to your destination (page 47). Note: You cannot transfer BlueChart g2 Vision data from the SD card to your computer for backup. You can transfer BlueChart g2 Vision data from the SD card to your computer for viewing purposes if HomePort is installed on your PC. You can only use the SD card on BlueChart g2 Vision-compatible Garmin GPS units and when using HomePort. Navigating with a Garmin Autopilot When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are connected to a compatible Garmin autopilot, you are prompted to engage the autopilot. NOTE: Autopilot can be used only with NMEA 2000 compatible chartplotters (GPSMAP 441/441s, GPSMAP 536/536s, GPSMAP 541/541s, and GPSMAP 546/546s). GPSMAP 400/500 Series Owner's Manual 29