Garmin GPSMAP 741xs Owner's Manual - Page 39
InFormation, dashBoarD, Engine, Gauge Setup, Engine Selection, EDit Engines, first Engine
View all Garmin GPSMAP 741xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Selecting the Engines Shown in Gauges You must manually select the number of engines shown in the engine gauges (page 32) before you can select the engines for which information appears in the gauges. 1. From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Engine Selection > Edit Engines. 2. Select First Engine. 3. Select the number of the engine for which you want to view information in the first gauge or bar. For example, if you select "3," the first engine bar shows information for the engine identified as "Engine3" on the NMEA 2000 network. 4. Repeat step 3 for the second, third, and fourth engine bar, as needed. 5. Select Back. Viewing Information Viewing Engine Gauges To view engine information, your chartplotter must be connected to a device capable of measuring fuel level ➊, fuel flow ➋, or both. From the Home screen, select Information > Dashboard > Engine. ➊ ➋ GPSMAP 400/500 Series Owner's Manual Configuring Engine Gauges The amount of fuel on board can be represented by either the total fuel level (numeric) or by individual tank level (graphic). From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Fuel Display. • Use Total Fuel Level-select to display a numeric value for the total fuel level. • Use Fuel Tank Levels > Num. Tanks-select to display a graphical representation of all the specified tanks. 33