Garmin GPSMAP 741xs Owner's Manual - Page 55

Change Tank LaBels

Get Garmin GPSMAP 741xs PDF manuals and user guides View all Garmin GPSMAP 741xs manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

• NMEA High Speed-supports the input or output of standard 0183 data for most AIS receivers. Serial Port 2 (if supported)-configures the input/output format for serial port 2 to use when connecting your chartplotter to external NMEA devices, a computer, or other Garmin devices. NMEA 0183 Setup-enable or disable NMEA 0183 output sentences for sounder, route, system, and Garmin NMEA settings. To enable or disable NMEA 0183 output sentences: 1. From the Home screen, select Configure > Communications > NMEA 0183 Setup. 2. Select a setting (Sounder, Route, System, or Garmin). 3. Select the NMEA 0183 output sentence to toggle the output on or off. • Posn. Precision-adjust the number of digits (Two Digits, Three Digits, or Four Digits) to the right of the decimal point for transmission of NMEA output. • Waypoint IDs-determine how the unit identifies waypoint identifiers (Names or Numbers). • Defaults-resets all NMEA 0183 sentences to the default setting. NMEA 2000 Setup Configuring the Chartplotter NOTE: The GPSMAP 431/431s and GPSMAP 531/531s are not NMEA 2000 compatible. • Device List-lists the NMEA 2000 devices on your network. If a NMEA 2000 device has configuration options or settings, select the device for a list of options. • Label Devices-allows you to name your engines and tanks so that you can better identify their location on the boat. To label engines as numbers: From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels > Use Numbers. To label engines as names: 1. From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels > Label Type > Choose Names. 2. Select the engine you want to name. 3. Select the location of the engine: Port (P), Center (C), Starboard (S), Fore (F), or Aft (A). 4. Select the label you want to use for the engine. To label tanks as numbers: 1. From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Tank Labels. 2. Select the type of tank you want to label. 3. Select Use Numbers. GPSMAP 400/500 Series Owner's Manual 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Configuring the Chartplotter
GPSMAP 400/500 Series Owner’s Manual
49
•
NMEA High SpeeD
—supports the input or output of standard 0183 data
for most AIS receivers.
Serial Port 2
(if supported)—configures the input/output format for serial
port 2 to use when connecting your chartplotter to external NMEA devices, a
computer, or other Garmin devices.
NMEA 0183 Setup
—enable or disable NMEA 0183 output sentences for
sounder, route, system, and Garmin NMEA settings.
To enable or disable NMEA 0183 output sentences:
1. From the Home screen, select
Configure
>
Communications
>
NMEA
0183 Setup
.
2. Select a setting (
SounDer
,
Route
,
SYstem
, or
Garmin
).
3.
Select the NMEA 0183 output sentence to toggle the output on or off.
•
Posn. Precision
—adjust the number of digits (
Two digits
,
Three digits
,
or
four digits
) to the right of the decimal point for transmission of NMEA
output.
•
WaYpoint Ids
—determine how the unit identifies waypoint identifiers
(
Names
or
NumBers
).
•
deFaults
—resets all NMEA 0183 sentences to the default setting.
NMEA 2000 Setup
NOTE:
The GPSMAP 431/431s and GPSMAP 531/531s are not NMEA 2000
compatible.
•
device List
—lists the NMEA 2000 devices on your network. If a NMEA
2000 device has configuration options or settings, select the device for a list
of options.
•
LaBel devices
—allows you to name your engines and tanks so that you
can better identify their location on the boat.
To label engines as numbers:
From the Home screen, select
Configure
>
Communications
>
NMEA
2000 Setup
>
LaBel devices
>
Change Engine LaBels
>
Use NumBers
.
To label engines as names:
1. From the Home screen, select
Configure
>
Communications
>
NMEA
2000 Setup
>
LaBel devices
>
Change Engine LaBels
>
LaBel TYpe
>
Choose Names
.
2. Select the engine you want to name.
3. Select the location of the engine:
Port (P)
,
Center (C)
,
StarBoarD (S)
,
fore (f)
, or
AFt (A)
.
4.
Select the label you want to use for the engine.
To label tanks as numbers:
1. From the Home screen, select
Configure
>
Communications
>
NMEA
2000 Setup
>
LaBel devices
>
Change Tank LaBels
.
2. Select the type of tank you want to label.
3. Select
Use NumBers
.