Garmin GPSMAP 741xs Owner's Manual - Page 68
Placing an Individual Routine Call, Calling an AIS Target, InFormation, Other Vessels, dSC List, Trail
View all Garmin GPSMAP 741xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Digital Selective Calling (DSC) To show or hide the trail line for a specific vessel that is sending position reports: 1. From the Home screen, select Information > Other Vessels > DSC List. 2. Select the vessel from the list > Edit. 3. Select Trail. To change the symbol and color of the trail line for a vessel: 1. From the Home screen, select Information > Other Vessels > DSC List. 2. Select the vessel from the list > Edit. 3. Select an option: • Select Symbol to edit the symbol. • Select Trail Line to edit the line color. Placing an Individual Routine Call When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use the chartplotter interface to set up an individual routine call. When setting up an individual routine call from your chartplotter, you can select one of the following channels on which you want to communicate. The radio transmits this request with your call. The selection of a DSC channel is limited to those channels that are available in all frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. NOTE: The default channel is 72. However, select Channel to select a different channel from the list. If you select a different channel, the chartplotter uses that channel for subsequent calls until you call using a different channel. To make an individual routine call: 1. While viewing a chart, press MENU > Other Vessels > DSC > DSC List. 2. Select the station to call from the list. 3. Select Review > Call with Radio. 4. Select Send to send the information about the call to the radio. 5. On your Garmin VHF radio, select Call. Calling an AIS Target When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use the chartplotter interface to set up an individual routine call to an AIS target. For more information on selecting a channel other than the default channel (Channel 72), see (page 62). To make an individual routine call to an AIS target: 1. While viewing a chart, use the Rocker to select an AIS target . 2. Select AIS Vessel > Call with Radio. 3. Select Send to send the information about the call to the radio. 4. On your Garmin VHF radio, select Call. 62 GPSMAP 400/500 Series Owner's Manual