Garmin GTN 650 Cockpit Reference Guide - Page 33
Crossfill
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Crossfill Dual units may be interfaced to crossfill information between the two units. This option will not be available unless dual units are configured. The following data is always crossfilled: • User waypoints • Flight plan catalog • Alerts (Pop-up acknowledgement for traffic, missed approach waypoint, and altitude leg) • External sensors (transponder status and commands, synchro heading) • System setup Favorite NAV frequencies Date/Time convention Nearest airport criteria Units (NAV angle, Distance/Speed, etc.) Favorite COM frequencies Ownship icon CDI Scale setting ILS CDI Capture setting This data is crossfilled only if crossfill is turned on by the pilot: • Active navigation (flight plan) 1. While viewing the System Setup page, touch the Crossfill key to toggle between Enabled and Disabled Crossfill. 2. When Crossfill is about to be enabled, you will be prompted to note that data will be overwritten in the other unit. Touch OK to enable Crossfill or touch Cancel to return to the System Setup page without enabling Crossfill. System 190-01004-04 Rev. C Touch OK to enable crossfill with dual units. Confirming Crossfill Selection GTN 625/635/650 Cockpit Reference Guide (CRG) 27