Garmin GTN 650 Cockpit Reference Guide - Page 51
Set the CDI/HIS selected
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Message REMOTE KEY STUCKNAV remote transfer key is stuck. REMOTE KEY STUCKTAWS inhibit key is stuck. SELECT FREQUENCYSelect appropriate NAV frequency for approach. SET COURSESet course on CDI/HSI to [current DTK]. Description The remote NAV transfer (NAV RMT XFR) key/switch has been in a pressed position for at least 30 seconds. This input will now be ignored. This input is not available in all installations. The TAWS INHIBIT discrete input has been in a pressed position for at least 30 seconds. This input will now be ignored. This input is not available in all installations. Correct NAV frequency is not set in the active NAV frequency for the approach procedure. The selected course on the CDI/HSI does not match the current desired track. Action Verify the NAV RMT XFR key/switch is not stuck. Contact dealer for service if this message persists. Verify the TAWS INHIBIT key/ switch is not stuck. Contact dealer for service if this message persists. Insert the correct frequency into the active navigation frequency window. Set the CDI/HIS selected course to the current desired track. Messages 190-01004-04 Rev. C GTN 625/635/650 Cockpit Reference Guide (CRG) 45