Garmin aera 560 Pilot's Guide - Page 155
Interfacing
View all Garmin aera 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Appendix D Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Blue: TX (Data Out) Yellow: RX (Data In) White: Audio Right Brown: Audio Left Green: Audio Common Black: Ground Red: Power aera Aviation Bare Wire Connector Interfacing The following formats are supported for connection of external devices: NMEA 0180, 0182, 0183 (versions 1.5, 2.0, 2.3, 3.01), ASCII Text Output, and Garmin proprietary formats for connecting to a Mode S transponder for TIS data, and to a Garmin aviation NAV/COM radio. The following are the Approved Sentences for NMEA 0183, version 3.01 output: GPRMC, GPGGA, GPGSA, GPGSV, GPGLL, GPBOD, GPRTE, and GPWPL. The following are the Proprietary Sentences for NMEA 0183, version 3.01 output: PGRME, PGRMZ, PGRMM, and PGRMH. Garmin's proprietary communication protocol is available from the Web site (www. garmin.com). General Interface Setup The Interface Setup controls the input/output format used when connecting the unit to external devices. Selecting an interface: 1) From the 'Home' Screen, touch Tools > Setup > Interface. 2) Touch Serial Data Format. A vertical list is displayed. 3) Touch the desired data format ('Garmin Data Transfer', 'NMEA Out', 'Aviation In', 'Aviation In/NMEA & VHR Out', 'TIS In', 'TIS In/NMEA & VHF Out', or 'None'. 4) If desired, touch Menu > Description. 190-01117-02 Rev. A Garmin aera 500 Series Pilot's Guide 143 Appendices Index