Garmin aera 560 Pilot's Guide - Page 156
Tools, Setup, Interface, Restore Default, Serial Data Format, NMEA Out, NMEA Output Mode, Normal - exchange
View all Garmin aera 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Appendix D Overview GPS Navigation Additional Features Hazard Avoidance Flight Planning Restoring interface defaults: From the 'Home' Screen, touch Tools > Setup > Interface > Menu > Restore Default. Serial Data Formats • Garmin Data Transfer-the proprietary format used to exchange data with a PC or another Garmin aera. • NMEA Out-transmits NMEA position, velocity, and navigation data. • Aviation In-the proprietary format used for connection to a Garmin panelmounted GPS receiver. This eliminates the need to enter the destination on both units. • Aviation In/NMEA & VHF Out-receives aviation data and transmits out both NMEA data, at 9600 baud, and VHF frequency tuning information to a Garmin Nav/Comm radio. • TIS In-receives TIS data from a Garmin Mode S transponder or other compatible device. • TIS In/NMEA & VHF Out-receives TIS data and transmits out both NMEA data, at 9600 baud, and VHF frequency tuning information to a Garmin Nav/Comm radio. • None-provides no interfacing capabilities. Advanced NMEA Output Setup If interfacing the aera with another piece of equipment (such as an autopilot), the unit needs to be set to output NMEA data. If the NMEA output mode is set to 'Fast', the unit will output a minimum number of NMEA sentences at 1-second intervals. If the NMEA output is set to 'Normal', the unit will output a greater number NMEA sentences as 2-second intervals. Setting NMEA output mode: 1) From the 'Home' Screen, touch Tools > Setup > Interface. 2) Touch Serial Data Format. A vertical list is displayed. 3) Touch 'NMEA Out'. 4) Touch NMEA Output Mode to toggle between 'Normal' or 'Fast'. 144 Garmin aera 500 Series Pilot's Guide 190-01117-02 Rev. A Appendices Index