Garmin iQue M5 Setup Guide - Page 3

Step 2-Charge the Battery Before you can continue setting up your iQue M5, you should charge the battery for four full hours. To charge the battery: 1. Locate the Sync cradle and the AC charger from the product packaging. 2. Plug one end of the AC charger into the back of the Sync cradle. Plug the other end into a standard wall outlet. NOTE: Do not connect the Sync cradle to your computer until you are instructed to do so in a later step! 3. Insert the iQue M5 into the cradle by aligning the sides of the unit with the sides of the cradle. Then slide the unit gently down until it clicks into place. Step 3-Set Up the iQue M5 After four hours have passed, turn on the iQue M5 by pressing the Power button, shown to the right. If the iQue M5 is charged completely, the LED light on the top of the unit should illuminate in green. If it is illuminated in orange, the unit needs to finish charging. When the unit is completely charged, follow the on-screen setup instructions. Note: You may see a "Backup Battery Very Low" warning, even after you have charged the lithium-ion battery completely. This warning relates to the internal memory battery, which retains data when the main battery is removed. It may take up to two days to charge the internal memory battery completely. During this time, you can still use your iQue M5 out of the cradle. Power button