Garmin nuvi 680 Owner's Manual - Page 10

Getting Started Step 1: Mount the nüvi Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. See page 43. Mounting the nüvi on Your Windshield 1. Plug the vehicle power cable into the power connector on the back of the cradle. 2. Clean and dry your windshield and the suction cup with a lint-free cloth. Place the suction cup on the windshield. 3. Flip the lever back, toward the windshield. 4. Flip up the GPS antenna. Fit the bottom of your nüvi into the cradle. ➊ ➋ Windshield 5. Tilt the nüvi back until it snaps into place. 6. Plug the other end of the vehicle power cable into a power outlet in your vehicle. The green LED on the vehicle power cable lights when connected to external power. Your unit should turn on automatically if it is plugged in and your vehicle is running. ➍ To remove the nüvi from the cradle, press the small tab on the bottom of the cradle up, and tilt the top of the nüvi forward. ➌ ➎ Microphone jack To remove the cradle from the mount, turn the cradle as far as you can to the right or left. Apply pressure in that direction until the cradle snaps off the mount. To remove the suction cup mount from the windshield, flip the lever toward you. Pull the tab on the suction cup toward you.  nüvi 680 Owner's Manual