Gateway M-6319 8512949 - Component Replacement Manual R0 - Page 1

Replacing the AC Adapter Replacing the AC Adapter To connect the AC adapter: 1 Connect the power cord to the AC adapter. Caution Replace the power cord if it becomes damaged. The replacement cord must be of the same type and voltage rating as the original cord or your notebook may be damaged. 2 Connect the AC adapter to your notebook's power connector. 1 3 Plug the power cord into an AC power outlet. The battery charge indicator turns on. Battery charge indicator If the battery charge indicator does not turn on: • Unplug the adapter from your notebook, then plug it back in. • Press FN+F1 to toggle the status lights on and off. • Make sure the power cord is firmly attached to the AC adapter. • Plug the power cord into a different wall outlet. Warning Do not attempt to disassemble the AC adapter. The AC adapter has no user-replaceable or user-serviceable parts inside. The AC adapter has dangerous voltages that can cause serious injury or death. Contact Gateway about returning defective AC adapters. Important If the battery charge indicator does not turn blue after three hours, contact Gateway Customer Care at the Web address or telephone number shown on the label on the bottom of your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. © 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.