Gateway M-6319 8512949 - Component Replacement Manual R0 - Page 8

Important, Caution, damage the LCD panel.

Page 8 highlights

Replacing the keyboard 15 Lift the back edge of the keyboard slightly, then slowly slide it toward the LCD panel to release the keyboard retaining tabs located on the front edge of the keyboard. 2 20 Insert the tabs on the front edge of the keyboard into the slots under the palm rest. You may need to press down on the keyboard keys along the front edge of the keyboard to seat the retaining tabs into their corresponding slots. 16 Slide the brown keyboard connector clips to the back of your notebook, then slide the cable out of the clips. Be careful not to touch or damage any other components. Clip Clip 17 Remove the old keyboard. 18 Place the new keyboard keys-up on your notebook with the space bar toward you. 19 Make sure the brown keyboard connector clips are fully moved toward the back of your notebook, insert the cable into the connector, then slide the brown clips to lock the connector in place. Important The keyboard cable is correctly oriented if it is not twisted. 21 Gently press the keyboard down until it is flat all the way across. The keyboard should easily fall into place. Be careful to not damage the LCD panel. 22 Replace the screws removed in Step 14. 23 Replace the keyboard cover. Press down on the cover in several places until it clicks in place. The cover is correctly mounted when you can run your finger along the cover and find no loose spots. The cover should be flat all the way across. Caution If the cover is not correctly replaced, your notebook could be damaged when you try to close the LCD panel. 24 Close the LCD panel. 25 Turn your notebook over so the bottom is facing up. 26 Replace the screw removed in Step 9. 27 Slide the battery into your notebook until it snaps into place. 28 Slide the battery lock to the locked position. 29 Turn your notebook over. 30 Connect the power adapter, modem cable, and network cable 31 Reconnect all peripheral devices and replace any Express cards. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. © 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your
Reference Guide
for important safety, regulatory, and legal information.
© 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
Replacing the keyboard
15
Lift the back edge of the keyboard slightly, then slowly slide it
toward the LCD panel to release the keyboard retaining tabs
located on the front edge of the keyboard.
16
Slide the brown keyboard connector clips to the back of your
notebook, then slide the cable out of the clips. Be careful not to
touch or damage any other components.
17
Remove the old keyboard.
18
Place the new keyboard keys-up on your notebook with the space
bar toward you.
19
Make sure the brown keyboard connector clips are fully moved
toward the back of your notebook, insert the cable into the
connector, then slide the brown clips to lock the connector in place.
20
Insert the tabs on the front edge of the keyboard into the slots
under the palm rest. You may need to press down on the keyboard
keys along the front edge of the keyboard to seat the retaining
tabs into their corresponding slots.
21
Gently press the keyboard down until it is flat all the way across.
The keyboard should easily fall into place. Be careful to not
damage the LCD panel.
22
Replace the screws removed in Step 14.
23
Replace the keyboard cover. Press down on the cover in several
places until it clicks in place. The cover is correctly mounted when
you can run your finger along the cover and find no loose spots.
The cover should be flat all the way across.
24
Close the LCD panel.
25
Turn your notebook over so the bottom is facing up.
26
Replace the screw removed in Step 9.
27
Slide the battery into your notebook until it snaps into place.
28
Slide the battery lock to the locked position.
29
Turn your notebook over.
30
Connect the power adapter, modem cable, and network cable
31
Reconnect all peripheral devices and replace any Express cards.
Important
The keyboard cable is correctly oriented if it is not twisted.
Clip
Clip
Caution
If the cover is not correctly replaced, your notebook could be
damaged when you try to close the LCD panel.
2