GE AJCS12DCC Owners Manual - Page 13

Installation Instructions Read these instructions completely and carefully. Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician. TOOLS YOU MAY NEED Phillips head screwdriver Adjustable Wrench Drill Pencil Hand or Saber Saw Ruler or Tape Measure Scissors or knife Level GE KIT NUMBERS USE GE KIT NUMBER: RAK56A100 RAK1072 FOR: GE RAB13, 14 & 15 (ACLB & RCL Chassis) Hotpoint ACXB10 & 11 (ACTB Chassis) RAK1082 Whirlpool Type 23W Wall Case RAK1102 RAK123A64 GE RAB30 ("F" models) Fedders Wall Case "A" RAK126 Westinghouse Wall Case (Type 2626D73H01) RAB46, 47 & 48 Use these kits for all other brands not listed. RAK690 RAG13 RAG14E RAB36, 37, 38, 46, 47 or 48 (J-Chassis) RAB36, 37, 38, 46, 47 or 48 (J-Chassis) RAB36, 37, 38, 46, 47 or 48 (J-Chassis) DESCRIPTION: Fits all GE wall cases 26″W x 18″H x 24″D Adapts an older Hotpoint wall case to a "J" model chassis. Fits Hotpoint wall cases 253⁄4″W x 167⁄8″H x 185⁄8″D Adapts Whirlpool wall case to a "J" model chassis. Fits Whirlpool wall cases 257⁄8″W x 161⁄2″H x 231⁄8″D Adapts GE wall case to a "J" model chassis. Fits the RAB 30 wall case 26″W x 18″H x 24″D Adapts Fedders wall case to a "J" model chassis. Fits Fedders wall cases 27″W x 163⁄4″H x 163⁄4″D Adapts Westinghouse wall case to a "J" model chassis. Fits Westinghouse wall cases 257⁄8″W x 157⁄16″H x 16″D Standard wall case for "J" model chassis. RAG13 stamped aluminum exterior grille included. Remove the existing case and replace. If you attach a custom architectural outdoor grille, use this kit to ensure proper airflow. Standard aluminum exterior grille (included with RAB46, 47, and 48 wall cases) Architectural louvered exterior grille 13