GE C2S980S Use and Care Manual - Page 25
Gas/Control Lockout, ge.com, BROIL HI/LO, CLOCK, START, COOKING TIME, Hld OFF., GAS/CONTROL, LOCKOUT
View all GE C2S980S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Safety Instructions Operating Instructions ge.com Gas/Control Lockout (on some models) Your control will allow you to lock out the surface burners, oven burners and control panel so they cannot be activated. To lock/unlock the controls: Turn all surface burners off. Touch and hold the GAS/CONTROL LOCKOUT pad for 3 seconds until the display shows LOC. When this feature is on and the touch pads are touched, the control will beep and the display will show LOC. ■ The control lock-out mode affects all controls. No controls will work when this feature is activated. ■ The adjustment will be retained in memory after a power failure. To unlock the control, touch and hold the GAS/CONTROL LOCKOUT pad for 3 seconds until LOC disappears from the display. 12 Hour, 24 Hour or Clock Black-Out Your control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below. Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Touch the CLOCK pad once. The display will show 12 hr. If this is the choice you want, touch the START pad. Touch the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, touch the START pad. Touch the CLOCK pad again to black-out the clock display. The display will show OFF. If this is the choice you want, touch the START pad. NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function. Cook and Hold Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished. This feature can only be used when timed cooking. To activate this feature, follow the steps below. Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Touch the COOKING TIME pad. The display will show Hld OFF. Touch the COOKING TIME pad again to activate the feature. The display will show Hld ON. Touch the START pad to activate the cook and hold feature and leave the control set in this special features mode. Installation Instructions Troubleshooting Tips Consumer Support 25