GE C2S980S Use and Care Manual - Page 38
Oven Light Replacement, Oven Shelves, To remove, Do not remove any screws to remove, the cover.
View all GE C2S980S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Operating Instructions Safety Instructions Care and cleaning of the range. Oven Shelves and Drawer Racks Clean the shelves with an abrasive cleanser. The oven shelves may be cleaned in the self-cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle. To make the shelves slide more easily, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel. Wire cover holder. Oven Light Replacement CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely. The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily. To remove: Hold a hand under the cover so it doesn't fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover. Do not remove any screws to remove the cover. Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb. To replace cover: Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover. Connect electrical power to the range. Installation Instructions Consumer Support Troubleshooting Tips 38