GE GFWS1705HDG Use and Care Manual - Page 22
Water Supply Requirements, Drain Requirements
View all GE GFWS1705HDG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Instructions WATER SUPPLY REQUIREMENTS Hot and cold water faucets MUST be installed within 42 inches (107 cm) of your washer's water inlet. The faucets MUST be 3/4" (1.9 cm) garden hose-type so inlet hoses can be connected. Water pressure MUST be between 10 and 120 pounds per square inch. Your water department can advise you of your water pressure. The hot water temperature should be set to deliver water at 120° to 140°F (48°-60°C). DRAIN REQUIREMENTS 1. Drain capable of eliminating 17 gals (64.3 L) per minute. 2. A standpipe diameter of 1-1/4" (3.18 cm) minimum. 3. The standpipe height above the floor should be: Minimum height: 24" (61 cm) Maximum height: 96" (244 cm) BACK 96" (244 cm) Max. 24" (61 cm) Min. NOTE: The drain hose attached to the washer can reach a 58" (147 cm) high standpipe. For a higher standpipe, contact an authorized parts distributor. 22