GE GFWS1705HDG Use and Care Manual - Page 24
Installing The Washer, Replacement Parts - reviews
View all GE GFWS1705HDG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Instructions INSTALLING THE WASHER (cont.) 8. Attach the U-shaped hose guide to the end of the drain hose. Place the hose in a laundry tub or standpipe and secure it with the cable tie provided in the enclosure package. NOTE: Placing the drain hose too far down the drain pipe can cause a siphoning action. No more than 7 inches of hose should be in the drain pipe. There must be an air gap around the drain hose. A snug fit can also cause a siphoning action. Cable Tie Cable Tie Video Scan this code to watch a video on this topic. Cable Tie 10. Turn on the power at the circuit breaker/fuse box. 11. Read the rest of this Owner's Manual. It contains valuable and helpful information that will save you time and money. 12. Before starting the washer, check to make sure: Main power is turned on. The washer is plugged in. The water faucets are turned on. The unit is level and all four leveling legs are firmly on the floor. The shipping support hardware is removed and saved. The drain hose is properly tied up. There are no leaks at the faucet, drain line or washer. 13. Run the washer through a complete cycle. Check for water leaks and proper operation. 14. If your washer does not operate, please review the Before You Call For Service section before calling for service. 15. Place these instructions in a location near the washer for future reference. REPLACEMENT PARTS If replacement parts are needed for your washer, they can be ordered in the United States by visiting our Web site at GEAppliances.com or by calling 800.GE.CARES. In Canada, call 800.661.1616. 9. Plug the power cord into a grounded outlet. NOTE: Check to be sure the power is off at the circuit breaker/fuse box before plugging the power cord into an outlet. 24