GE PDW8600NCC Installation Instructions - Page 3

Installation Preparation - parts

Page 3 highlights

Installation Preparation PARTS SUPPLIED: ■ Two #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or sides of cabinets. (Screws located in user bag.) ■ Side and top trim pieces ■ Trim Panel Accessory Kit (not shown). Model PDW9700 only ■ Drain Hose, Drain Hose Hanger and Hose Clamp #8 Phillips Special Head Screws 5/8" long #8 Phillips Special Head Screws Trim Pieces Drain Hose Hose ClampDishwasDhraeinrHoTserHimangerPieces MATERIALS YOU WILL NEED: ■ Ferrule, compression nut and 90° Elbow (3/8" NPT external thread on one end, opposite end sized to fit water supply) ■ Thread seal tape ■ UL Listed wire nuts (3) Drain Hose Hose Clamps 90° Elbow, Ferrule and Compression Nut Hand Shut-Off Valve Thread Seal Tape Wire Nuts (3) Materials For New Installations Only: ■ Air gap for drain hose, if required Hand ValveTape Wire Nuts ■ Waste tee for house plumbing, if applicable ■ Electrical cable or power cord, if applicable 90 ° Elbow Waste Tee Electrical Cable (or Power Cord, if applicable) Hot Water Line ■ Screw type hose clamps ■ Strain relief for electrical connection Waste Tee ■ Hand shut-off valve ■ Water line 3/8" min. copper ■ Coupler for extending drain line, if applicable Air Screw Type Gap Hose Clamps Hot Water Line Strain Relief Coupler TOOLS YOU WILL NEED: ■ Phillips head screwdriver ■ 1/4" and 5/16" nutdriver ■ 6" Adjustable wrench Electrical CabStlreain Air Gap Hose Clamps Phillips 1/4" and Level Relief Coupler Head 5/16" Nutdriver Screwdriver ■ Level ■ Carpenters square ■ Measuring tape Screw DriverNIuItdriver Level 2 ■ Safety glasses ■ Flashlight ■ Bucket to catch water when flushing the line ■ 15/16" socket (optional for skid removal) ■ Gloves 1/4" and 6" Adjustable Tubing Cutter Carpenters 5/16" Socket Wrench Square Ratchet & SockCeretscent WTurebnicnhg CuttCearrpenters Square For New Installations Only: ■ Tubing cutter ■ Drill and appropriate bits ■ Hole saw set Flashlight Safety Glasses Measuring Tape FlashlightSafety GlasMseesasuring Tape Gloves Bucket Hole Saw Set Drill and Bits 2 GLOVES Bucket Hole Saw Bit Drill & Bits

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

PARTS SUPPLIED:
Two #8-18 x 5/8" Phillips special head screws, to
secure dishwasher to underside of countertop or
sides of cabinets. (Screws located in user bag.)
Side and top trim pieces
Trim Panel Accessory Kit (not shown).
Model PDW9700 only
Drain Hose, Drain Hose Hanger and Hose Clamp
Installation Preparation
TOOLS YOU WILL NEED:
Phillips head screwdriver
1/4" and 5/16" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
15/16" socket (optional for skid removal)
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection
Hand shut-off valve
Water line 3/8" min. copper
Coupler for extending drain line, if applicable
#8 Phillips
Special Head Screws
5/8” long
Hose Clamp
Drain Hose
Trim Pieces
Hand
Shut-Off
Valve
90° Elbow,
Ferrule and
Compression Nut
Thread
Seal Tape
Wire Nuts (3)
Hot Water Line
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Coupler
Air
Gap
Screw Type
Hose Clamps
Strain Relief
Phillips
Head
Screwdriver
1/4" and
5/16" Nutdriver
Level
Carpenters
Square
1/4" and
5/16" Socket
6" Adjustable
Wrench
Tubing Cutter
Measuring Tape
Safety Glasses
Flashlight
Gloves
Bucket
Hole Saw Set
Drill and Bits
2
Drain Hose Hanger