GE PGB900 Owners Manual - Page 24
Hour, 24-Hour or Clock Blackout, Control Lockout on some models, Broil Hi/Lo, Clock, Start
View all GE PGB900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating Instructions Safety Instructions Special features of your upper oven control. GAS/CONTROL LOCKOUT Gas/Control Lockout (on some models) Your control will allow you to lock out the surface burners, oven burners and control panel so they cannot be activated. When this feature is on and the touch pads are touched, the control will beep and the display will show LOC ON. To lock/unlock the controls: Turn all surface burners off. Touch and hold the Gas/Control Lockout pad for 3 seconds until the display shows LOC ON. ■ The control lockout mode affects all controls. No controls will work when this feature is activated. ■ The adjustment will be retained in memory after a power failure. To unlock the control, touch and hold the Gas/Control Lockout pad for 3 seconds until the display shows LOC OFF. Control Lockout (on some models) Your control will allow you to lock out the touch pads so they cannot be activated when touched or while cleaning the glass panel. To lock the controls: Touch the 9 and 0 touch pads at the same time for 3 seconds until the control beeps twice. The display will show LOC continuously and the time of day if not blacked out. NOTE: All cooking and timing functions will be cancelled when locking out the control. To unlock the control, touch the 9 and 0 touch pads at the same time for 3 seconds until the control beeps twice, and LOC will be removed from the display. NOTE: Some models have a Control Lockout pad. Touch and hold it for 3 seconds to lock/unlock. 12-Hour, 24-Hour or Clock Blackout Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below. Touch the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF. Touch the Clock pad once. The display will show 12 hr. If this is the choice you want, touch the Start pad. Touch the Clock pad again to change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, touch the Start pad. Touch the Clock pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the Start pad. NOTE: If the clock is in the blackout mode, you will not be able to use the Delay Start function. Installation Instructions Consumer Support Troubleshooting Tips 24