GE PNM9196SFSS Installation Instructions - Page 10
Holes C and D are inside area E. If neither C nor D
View all GE PNM9196SFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Instructions D ALIGNING THE WALL PLATE Hole A Draw a Vertical Line on Wall from Center of Top Cabinet Hole B Hole C CAUTION: :HDUJORYHVWRDYRLGFXWWLQJ ILQJHUVRQVKDUSHGJHV Area E Hole D 1 Draw a vertical line on the wall at the center of the 30s wide space. 2 Use the mounting plate as the template for the rear wall. Place the mounting plate on the wall, making sure that the tabs are WRXFKLQJWKHERWWRPRIWKHFDELQHWRU WKHOHYHOOLQHGUDZQLQ6WHS&IRUFDELQHWVZLWKIURQW RYHUKDQJ/LQHXSWKHQRWFKDQGFHQWHUOLQHRQ WKHPRXQWLQJSODWHWRWKHFHQWHUOLQHRQWKHZDOO 3 While holding the mounting plate with one hand, draw circles on the wall at holes A, B, C and D (see illustration above/actual plate marked with arrows). Four holes PXVWEHXVHGIRUPRXQWLQJ NOTE: Holes C and D are inside area E. If neither C nor D is in a stud, find a stud somewhere in area E and draw a fifth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the oven. 6HWWKHPRXQWLQJSODWHDVLGH WARNING:5LVNRIHOHFWULFVKRFN&DQFDXVH LQMXU\RUGHDWK7DNHFDUHWRQRWGULOOLQWRHOHFWULFDOZLULQJ LQVLGHZDOOVRUFDELQHWV 4 Drill holes on the circles. If there is a stud, drill a 3ø16s hole for wood screws. For holes that don't line up with a stud, drill a 5ø8s hole for toggle bolts. NOTE:'2127028177+(3/$7($77+,67,0( 10