Gigabyte B650I AORUS ULTRA User Manual - Page 22

_0 _F _0 F 6) LED_C (Note 1) (RGB LED Strip Header) The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m. DEBUG PORT Pin No. Definition 1 12V 2G 1 3R 4B U B R G 12V B R G 12V Connect one end of the RGB LED strip extension cable to the header and the other end to your RGB LED strip. The black wire (marked with a triangle on the plug) of the extension cable must be connected to Pin 1 (12V) of this header. The 12V pin (marked with an arrow) on the other end of the extension cable must be lined up with the 12V of the LED strip. Be careful 1 12V with the connection orientation of the LED strip; incorrect connection may lead to the damage of the LED strip. _3 B R G 12V B R G 12V RGB LED Strip 7) D_LED (Note 2) (Addressable LED Strip Header) The header can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. S_ Pin No. Definition 1 1 V (5V) 2 Data 3 No Pin 4 GND _ F F_USB30 3 S S_F B_ _ S F_ _ _ _B F_USB3 B F_USB3 F _ Connect your addressable LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the addressable LED strip header. Incorrect connection may lead to the damage of the LED strip. 1 (Note 1) The connector is on the front of GC-B650I FRONT CARD. (Note 2) The connector is on the front of GC-B650I BTB PLUG. - 22 - Addressable LED Strip B_ _ _