Gigabyte GA-78LMT-USB3 Manual - Page 26

CPU Host Clock Control - overclock

Get Gigabyte GA-78LMT-USB3 PDF manuals and user guides View all Gigabyte GA-78LMT-USB3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

&& Surround View Enables or disables the Surround View function. This option is configurable only when Init Display First under Advanced BIOS Features is set to PEG and an ATI graphics card is installed. (Default: Disabled) && Onboard VGA output connect Specifies the graphics display of the onboard graphics output from the D-SUB/DVI-D or D-SUB/HDMI. Auto BIOS automatically determines the primary display port for output, depending on to which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default) D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display. && VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) && VGA Core Clock(MHz) Allows you to set the onboard graphics clock. The adjustable range is from 200 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is set to Manual. && CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. && CPU NorthBridge Freq. Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being installed. && Core Performance Boost (Note) Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default: Enabled) && CPB Ratio (Note) Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed. (Default: Auto) && Turbo CPB (Note) Allows you to determine whether to improve CPU performance. (Default: Disabled) && CPU Host Clock Control Enables or disables the control of CPU host clock. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Auto) && CPU Frequency(MHz) Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz. This option is configurable only when CPU Host Clock Control is set to Manual. Important: It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. && PCIE Clock(MHz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) && HT Link Width Allows you to manually set the width for the HT Link between the CPU and chipset. Auto BIOS will automatically adjust the HT Link Width. (Default) 8 bit Sets HT Link Width to 8 bit. 16 bit Sets HT Link Width to 16 bit. (Note) This item is present only when you install a CPU that supports this feature. - 26 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
- 26 -
&
Surround View
Enables or disables the Surround View function.
This option is configurable only when
Init Display First
under
Advanced BIOS Features
is set to
PEG
and an ATI graphics card is installed. (Default: Disabled)
&
Onboard VGA output connect
Specifies the graphics display of the onboard graphics output from the D-SUB/DVI-D or D-SUB/HDMI.
±
Auto
BIOS automatically determines the primary display port for output, depending on to
which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default)
±
D-SUB/DVI
Sets the D-SUB/DVI-D as the graphics display.
±
D-SUB/HDMI
Sets the D-SUB/HDMI as the graphics display.
&
VGA Core Clock control
Allows you to determine whether to manually set the VGA Core clock. (Default: Auto)
&
VGA Core Clock(MHz)
Allows you to set the onboard graphics clock. The adjustable range is from 200 MHz to 2000 MHz. This
item is configurable only if the
VGA Core Clock control
option is set to
Manual
.
&
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
&
CPU NorthBridge Freq.
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being installed.
&
Core Performance Boost
(Note)
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Enabled)
&
CPB Ratio
(Note)
Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed.
(Default: Auto)
&
Turbo CPB
(Note)
Allows you to determine whether to improve CPU performance. (Default: Disabled)
&
CPU Host Clock Control
Enables or disables the control of CPU host clock. Note: If your system fails to boot after overclocking,
please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the
board to default values. (Default: Auto)
&
CPU Frequency(MHz)
Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz.
This option is
configurable only when
CPU Host Clock Control
is set to
Manual
.
Important:
It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
&
PCIE Clock(MHz)
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 150 MHz.
Auto
sets the PCIe clock frequency to standard 100 MHz. (Default: Auto)
&
HT Link Width
Allows you to manually set the width for the HT Link between the CPU and chipset.
±
Auto
BIOS will automatically adjust the HT Link Width. (Default)
±
8 bit
Sets HT Link Width to 8 bit.
±
16 bit
Sets HT Link Width to 16 bit.
(Note)
This item is present only when you install a CPU that supports this feature.