Gigabyte GA-E7AUM-DS2H Manual - Page 39
FSB - Memory Clock Mode, FSB - Memory Ratio, FSB QDR, MHz, Actual FSB QDR, Mhz - overclock
View all Gigabyte GA-E7AUM-DS2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2008 Award Software MB Intelligent Tweaker(M.I.T.) Parameters FSB - Memory Clock Mode x FSB - Memory Ratio x FSB (QDR), MHz Actual FSB (QDR), Mhz x MEM (DDR), MHz Actual MEM (DDR), Mhz Setting [Auto] Auto Auto 800.0 Auto 800.0 Current Value 800.0 800.0 Item Help Menu Level Memory Timing Setting Robust Graphics Booster x VGA Core Clock CPU Clock Ratio (Note) ******** System Voltage Optimized System Voltage Control x DDR2 Voltage Control x FSB Voltage Control x Chipset Voltage Control x CPU Voltage Control Normal CPU Vcore ******** [Press Enter] [Disabled] + 1% [12X] [Auto] Normal Normal Normal Normal 1.32500V Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. FSB - Memory Clock Mode Auto BIOS will automatically set the FSB-Memory clock mode. (Default) Linked Allows you to set FSB speed manually; the memory speed changes proportion- ally along with the FSB speed. Unlinked Allows you to set FSB speed and memory speed individually. FSB - Memory Ratio This item is configurable only if the FSB-Memory Clock Mode option is set to Linked. Auto BIOS will automatically set the FSB-Memory ratio. (Default) Sync Mode Sets FSB-Memory ratio synchronously. FSB (QDR), MHz Allows you to manually set the CPU host frequency. The adjustable range is from 400 MHz to 2500 MHz. This item is configurable only if the FSB-Memory Clock Mode item is set to Linked or Unlinked. Actual FSB (QDR), Mhz The value depends on the FSB (QDR), MHz setting. (Note) This item appears only if you install a CPU that supports this feature. - 39 - BIOS Setup