Gigabyte GA-E7AUM-DS2H Manual - Page 48

2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Integrated Peripherals Onboard IDE Channel NV SATA Controller Onchip SATA Mode On-Chip USB USB Keyboard Support USB Mouse Support Legacy USB storage detect Onboard Audio Function HDMI Audio Onboard 1394 On-Chip MAC Lan  SMART LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA [Enabled] [Enabled] [IDE] [V1.1+V2.0] [Disabled] [Disabled] [Enabled] [Auto] [Auto] [Enabled] [Auto] [Press Enter] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Onboard IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) NV SATA Controller Enables or disables the integrated SATA controller. (Default: Enabled) OnChip SATA Mode Configures the operating mode of the integrated SATA controller. IDE Configures the SATA controller to IDE mode. (Default) (Only for the SATA2_0~2 connectors) RAID Enables RAID for the SATA controller. AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. On-Chip USB Configures the integrated USB controller. V1.1+V2.0 V1.1 Enables the integrated USB 1.1 and USB 2.0 controllers. (Default) Enables only the integrated USB 1.1 controller. Disabled Disables the integrated USB 1.1 and USB 2.0 controllers. USB Keyboard Support Allows USB keyboard to be used in MS-DOS. (Default: Disabled) USB Mouse Support Allows USB mouse to be used in MS-DOS. (Default: Disabled) Legacy USB storage detect Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during the POST. (Default: Enabled) GA-E7AUM-DS2H Motherboard - 48 -