Gigabyte GA-E7AUM-DS2H Manual - Page 40
MEM DDR, MHz, Actual MEM DDR, Mhz, Memory Timing Setting, tCL CAS Latency, Command Per Clock CMD
View all Gigabyte GA-E7AUM-DS2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
MEM (DDR), MHz Allows you to maually set the memory frequency. The adjustable range is from 400 MHz to 1400 MHz. This item is configurable only if the FSB-Memory Clock Mode item is set to Unlinked. Actual MEM (DDR), Mhz The value depends on the MEM (DDR), MHz setting. Memory Timing Setting CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Memory Timing Setting Parameters Memory Timing Setting x tCL (CAS Latency) x tRCD x tRP x tRAS x Command Per Clock (CMD) Setting [Optimal] Auto Auto Auto Auto Auto Current Value 5 5 5 18 2T Item Help Menu Level ** Advanced Memory Settings ** x tRRD x tRC x tWR x tWTR x tREF Auto Auto Auto Auto Auto 3 22 6 11 7.6uS Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Memory Timing Setting Expert allows all Timing mode below to be configurable. Options are: Optimal (default), Expert. tCL (CAS Latency) Options are: Auto (default), 1~7. tRCD Options are: Auto (default), 1~7. tRP Options are: Auto (default), 1~7. tRAS Options are: Auto (default), 1~31. Command Per Clock (CMD) Options are: Auto (default), 1 clock, 2 clock. ** Advanced Memory Settings ** tRRD Options are: Auto (default), 1~15. tRC Options are: Auto (default), 1~31. tWR Options are: Auto (default), 1~6. GA-E7AUM-DS2H Motherboard - 40 -