Gigabyte GA-K8VM800M User Manual - Page 42

English OnChip Serial ATA Enabled Enable VT8237 Serial ATA supported. (Default value) Disabled Disable VT8237 Serial ATA supported. SATA Mode RAID IDE Set onboard SATA mode to RAID. (Default value) Set onboard SATA mode to IDE. AC97 Audio Auto Disabled Enable onboard AC'97 audio function. (Default value) Disable this function. USB 1.1 Controller Disable USB 1.1 host controller if you are not using USB devices. Enabled Enable USB 1.1 controller. (Default value) Disabled Disable USB 1.1 controller. USB 2.0 Controller Disable USB 2.0 host controller if you are not using high speed USB devices. Enabled Enable USB 2.0 controller. (Default value) Disabled Disable USB 2.0 controller. USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Onboard H/W LAN Enabled Enable onboard LAN function. (Default value) Disabled Disable onboard LAN function. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard FDC Controller Enabled Enable onboard FDC Controller. (Default value) Disabled Disable onboard FDC Controller. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. GA-K8VM800M Motherboard - 42 -