Gigabyte GA-MA69G-S3H Manual - Page 49
CPU Clock Ratio, CPU Host Clock Control, CPU Frequency MHz, PCIE Clock MHz, NB/SB Voltage - overclocking
UPC - 818313003416
View all Gigabyte GA-MA69G-S3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
English 2-9 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2007 Award Software MB Intelligent Tweaker(M.I.T.) CPU Clock Ratio CPU Host Clock Control x CPU Frequency (MHz) PCIE Clock (MHz) NB/SB Voltage DDR2 Voltage Control CPU Voltage Control Normal CPU Vcore [Auto] [Auto] 200 [Auto] [Normal] [Auto] [Normal] 1.3500V Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. CPU Host Clock Control Enables or disables the control of CPU host clock. Auto (default) allows BIOS to automatically adjust the CPU host frequency. Manual allows the CPU Frequency (Mhz) item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. CPU Frequency (MHz) Allows you to manually set the CPU host frequency. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCIE Clock (MHz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 200 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) NB/SB Voltage Allows you to set the voltage of the Northbridge and Southbridge. Normal Supplies the Northbridge/Sourthbridge voltage as required. (Default) +0.025V~+0.200V Increases the Northbridge/Sourthbridge voltage by 0.025V to 0.200V. - 49 - BIOS Setup