Gigabyte GA-MA69G-S3H Manual - Page 75

View Drive Assignments

Get Gigabyte GA-MA69G-S3H PDF manuals and user guides
UPC - 818313003416
View all Gigabyte GA-MA69G-S3H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

English In the following procedure, we'll create RAID 0 as an example. 1. Under the RAID Mode section, press the Spacebar to select RAID 0. 2. Set the Stripe Block size. 64 KB is the default. 3. Under the Drives Assignments section, press the up or down arrow key to highlight a drive. 4. Press the Spacebar or to change the Assignment option to Y. This action adds the drive to the disk array. The Total Drv section will show the number of disks assigned. 5. Press + keys to save the information. The window below will appear. Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity... Figure 6 6. Press + to set the capacity of the RAID array or press other keys to set the array to its maximum capacity. 7. After the creation is complete, the screen will return to Define LD Menu where you will see the newly-created array. 8. Press to return to Main Menu and press again if you want to exit the RAID BIOS utility. View Drive Assignments The View Drive Assignments option in the Main Menu displays whether drives attached to the ATI SB600 controller are assigned to a disk array or are unassigned. Under the Assignment column, drives are labeled with their assigned disk array or shown as Free if unassigned. FastBuild (tm) Utility (c) 2006 ATI Technology, Inc. Channel:ID [ View Drives Assignments ] Drive Model Capacity (MB) 1:Mas WDC WD800JD-22LSA0 Extent 1 1:Mas WDC WD800JD-22LSA0 Extent 1 80026 79959 80026 79959 Assignment LD 1-1 LD 1-2 [K] Up [L] Down [ Keys Available] ] [ESC] Exit Figure 7 - 75 - Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Appendix
- 75 -
English
In the following procedure, we'll create RAID 0 as an example.
1.
Under the RAID Mode section, press the Spacebar to select
RAID 0
.
2.
Set the Stripe Block size. 64 KB is the default.
3.
Under the Drives Assignments section, press the up or down arrow key to highlight a drive.
4.
Press the Spacebar or <Y>to change the Assignment option to Y.
This action adds the drive to the
disk array. The Total Drv
section will show the number of disks assigned.
5.
Press <Ctrl>+<Y> keys to save the information. The window below will appear.
6.
Press <Ctrl>+<Y> to set the capacity of the RAID array or press other keys to set the array to its
maximum capacity.
7.
After the creation is complete, the screen will return to
Define LD Menu
where you will see the
newly-created array.
8.
Press <Esc> to return to Main Menu and press <Esc> again if you want to exit the RAID BIOS
utility.
View Drive Assignments
The
View Drive Assignments
option in the Main Menu displays whether drives attached to the ATI
SB600 controller are assigned to a disk array or are unassigned. Under the Assignment column, drives
are labeled with their assigned disk array or shown as
Free
if unassigned.
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
Figure 6
[
View Drives Assignments
]
[
Keys Available
]
]
[
] Up
[
] Down
[ESC] Exit
Channel:ID
Drive Model
Capacity (MB)
Assignment
1:Mas
WDC WD800JD-22LSA0
80026
Extent
1
79959
LD
1-1
1:Mas
WDC WD800JD-22LSA0
80026
Extent
1
79959
LD
1-2
FastBuild (tm) Utility (c) 2006 ATI Technology, Inc.
Figure 7