Haier AB072XCEAA Service Manual - Page 32

Cover of controll box, PCB on, indoor unit, Terminal block

Get Haier AB072XCEAA PDF manuals and user guides View all Haier AB072XCEAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

(2) Check if water drainage is smooth after installation. Chff^j\bZe Abj Chg]blbhg^j Charge, through air outlet or inspecting hole, 1200ccd water to see water drainage. After wiring Check water drainage in cooling operation. When wiring is not complete Remove cover of control box, short connect "CHECK" terminal of the indoor unit, which is on the uper part of indoor unit PCB. Connect 1PH power to terminal 1 and 2 on terminal block. Note, in this operation, fan will be running. Upon confirmation of a smooth water drainage, be sure to cut off power supply and remove short connection of "CHECK" terminal. Maintenance Method of water charging Self-provided stiff pipe Inspecting hole Water drainage port for maintenance (Drain water from this hole) 100mm Watering can of plastic pipe should be about 100 mm long Charge water from inspecting hole Charge water from air outlet PCB on indoor unit Terminal block Cover of controll box z 30 z

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Method of water charging
Charge water from
air outlet
Charge water from
inspecting hole
Watering can of plastic
pipe should be about
100 mm long
100mm
Water drainage port for
maintenance
(Drain water from
this hole)
Self-provided stiff pipe
Maintenance
Inspecting hole
Cover of controll box
PCB on
indoor unit
Terminal block
(2) Check if water drainage is smooth after installation.
Charge, through air outlet or inspecting hole, 1200ccd water to see water drainage.
After wiring
Remove cover of control box, short connect "CHECK" terminal of the indoor unit, which is on the uper
part of indoor unit PCB. Connect 1PH power to terminal 1 and 2 on terminal block.
Note, in this operation, fan will be running.
Upon confirmation
of a smooth water drainage, be sure to cut off power supply
and remove short connection of "CHECK" terminal.
Check water drainage in cooling operation.
When wiring is not
complete
±²³³´µ¶·¸¹ º·µ ±²»¼·½·²»´µ
±
3
0
±