Haier AB072XCEAA Service Manual - Page 41
Fasten the nut on the suspension screw and then hang the suspension screw in the T
View all Haier AB072XCEAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chff^j\bZe Abj Chg]blbhg^j Installing the suspension screw: Use M8 or M10 suspension screws (4, prepared in the field) (when the suspension screw height exceeds 0.9 m, M10 size is the only choice). These screws shall be installed as follows with space adapting to air conditioner overall dimensions according to the original building structures. Wooden structure A square wood shall be supported by the beams and then set the suspension screws. Square wood Suspension screw New concrete slab To set with embedded parts, foundation bolts etc. Beam Knife embedded part Original concrete slab Guide plate embedded part Iron reinforcement Foundation bolt Pipe suspension foundation bolt Use hole hinge, hole plunger or hole bolt. Steel reinforcement structure Use steel angle or new support steel angle directly. Hanging bolt Hanging of the indoor unit Suspension screw Support steel angle Fasten the nut on the suspension screw and then hang the suspension screw in the T slot of the suspension part of the unit. Aided with a level meter, adjust level of the unit within 5 mm. z 39 z